[Pearce32]

It started out with laser coming out headset but I held my hands out longer it takes about 10 or 15 seconds of holding my hands in front for the controllers to show up. I also cleaned my leap free of smudges and improved my lighting with another lamp and installed only the installer where it says here (red arrow) all this and it is now working. I also uninstalled driver4vr and deleted the left over folders then reinstalled dunno if that had any impact tho.

Attachments:

You must be logged in to view attached files.

[Pearce32]

Hi greg Eatheral hawk on discord has come to the conclusion we did not install the actual drivers themselves before we installed orion.the red arrow in picture. I will get back with results tomorrow thank you.

Attachments:

You must be logged in to view attached files.

[Pearce32]

Hi Greg no I dont see them in visualizer and yes I select leap for hand tracking

[Pearce32]

It was so cool! I was using my captoglove in steam vr as mouse!

[Pearce32]

Ok I’m thinking with this I might be able to use my gloves

[Pearce32]

Is it possible to do custom mapping?

[Pearce32]

Ok thanks Greg did not know that.

[Pearce32]

Sorry. I am saying right one maps in driver4vr and I think I may have gotten response in steam vr once. I dont understand how is driver4vr able to map one glove then?

[Pearce32]

It does respond to the mapping in driver4vr. I mapped the whole right glove

[Pearce32]

So all hope is lost then?

[Pearce32]

Ok so no go with antimicro but in joytokey they do show up but no response to finger bending.

[Pearce32]

Yea I did I tried both the old and new mapper in driver4vr. The old one didnt work very well so used the new one and got all fingers mapped to different buttons on left glove but right glove does not respond to mapping. After left glove was mapped no response in steam vr.

[Pearce32]

Ok so mapped to joystick in suite driver4vr recognizes mapping buttons having the gloves assigned to virtual controllers but could only get the left glove mapped right dont respond. There is no response in steam vr when bending fingers. The gloves dont show up in driver4vr unless I turn on vr gamepad and only thing can do is assign them to virtual controllers.

[Pearce32]

Will have to wait for that tho nevermind but the mapping will at least give some functionality.

[Pearce32]

Idk what I’m thinking that wont work correct because I want to use my hands like real in vr finger bending.

[Pearce32]

Driver4vr has mapping to vr controller now correct? Maybe it will let me map the gloves if I use joystick mapping in suite. If this is what your trying to say? Will have to try later.

[Pearce32]

I have a 360 kinect.

[Pearce32]

Would the new steam input mapping allow this? Idk

[Pearce32]

there is no driver yet. There is a suite on pc that let’s you configure the gloves, upload profiles to them, save profiles. You can map the gloves to just about any types of controls keyboard, mouse, joystick, gamepad. Pretty sure xinput works because can map to just about anything.Right now can only play games that let you map controls not VR games with no access to control configuration. The gloves use bluetooth. Here is manual that tells you all about them https://www.dropbox.com/s/u0d5hrpwpue7am1/CaptoGloveUserManual.pdf?dl=0

[Pearce32]

Hi I also have captoglove and have purchased driver4vr and am very interested in this idea.

[Author]

Posts