Forum Replies Created
-
AuthorPosts
-
ecou2508Participant
Dear Greg,
hope you did not waste too much time with my daydream problem. i’ll come back when i have the opportunity to get some kinect controller.
Thanks !
Regards,
Eddy, Belgium.ecou2508ParticipantOh yes, i see…. 🙁
So, what do i need to play a little bit, knowing i have a not-at-all-powerfull config ?
A kinect xbox 360 controller like this one:
https://www.ebay.com/itm/XBOX-360-Microsoft-Kinect-Sensor-Bar-Only-Black-/152862140249
and some illuminated balls ?
Do you have tuto or video, so i can learn a bit more on that ?Thanks !
Eddyecou2508Participantin steam VR apps like EARTH-VR and Droid repair, i can move my head and look anywhere (360°)
but i have no way to interact with environment or 3d selection menu appearing…until i get that daydream ctrl working one way or another ?
thanks
Eddyecou2508Participantcross post.. 😉
Yes, nice idea !
Head tracking is working fine in STEAM VR with vridge and the sensors of my mobile phone (gyro and accelero).
So, all i need is the daydream pointer working 🙂
Eddy
ecou2508ParticipantDo i need to install Kinect SDK or Runtime ?
(i don’t have any kinect hw…)Eddy
ecou2508ParticipantGreg,
i don’t have any kinect hardware ! Headtracking is done by smartphone via Vridge.Also, can you write if you reply to me or bad.boo ?
Thanks,
Eddyecou2508ParticipantAbout daydream/virtoba-S1 controller:
It has never worked before i tried the 3.7.1I’m using Vridge beta with Riftcat2 and moonlight latest android version.
Do i need to select some kind of handtracking in driver4vr for the daydream controller to work in steamVR ?
ecou2508Participantright, looks like steam does not see anything. i ‘ll try rebooting everything and try again…
ecou2508ParticipantSteam logs with 3.7.1
Droid and earth VR : daydream controller does not appears.
but works in driver, preview controller.
Attachments:
You must be logged in to view attached files.ecou2508ParticipantLooks like Steam(VR) does not see my daydream (virtoba) pointer.
But in Driver4VR, preview, it working fine !
Do you need some logs with the 3.7.xx
ecou2508ParticipantWith the 3.7.x you sent me above:
Virtoba S1 working in preview (driver4VR) 🙂
doing some tests in steam, keep you posted !
Eddy
ecou2508ParticipantHere are the logs with 3.5.1.0
Attachments:
You must be logged in to view attached files.ecou2508ParticipantHi Greg,
Still doing some tests with a Virtoba S1 daydream controller: No way…
I probably should do something wrong but without any kind of documentation, i can not go further…
The device connect in bluetooth, is seen by Driver4VR…but then…? What’s next ?
i attache 2 screen captures, i probably forgot some big step but as i said: with no documentation, no direction…. where can i go ?
regards,
Eddy.
PS: by the way, the device respond under android with a simple test tool. So it can connect and is not broken.Attachments:
You must be logged in to view attached files.ecou2508ParticipantDear Greg,
Is Bluetooth stack of windows 10 ok for supporting a daydream controller (virtoba S1).
Mine appears to paired and connected in BT Device manager but while testing in the device test windows of DRIVER4VR, nothing.. ! The device is well listed but even the button state do not responds to action.Any idea ? maybe try a different bluetooth stack ?
Thanks,
Eddy, Belgium.Attachments:
You must be logged in to view attached files. -
AuthorPosts