Ps Move driver4vr lags out of controll

Homepage Forums How-to and troubleshooting Ps Move driver4vr lags out of controll

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #10980
    Alex PotterAlex Potter
    Participant

    Its starting to get really frustrating, whenever I start driver4vr, it completely locks up. If I click calibration it takes about 10-15min before it actually comes up. And once it does, the kinect lags so bad that when I put the ms move in front of the camera it takes about 2-3 minuted before the first frame actually loads up with the correct image. I’ve reinstalled many times, reinstalled steamVR multiple times along with driver4vr. So Im at a loss right now.

    When driver4vr is not running:
    -Window is smooth

    -Kinect fps – 59-60Very Good

    -Driver4vr – 27-32Low

    -Ps Move calibration runs smooth and connects fine

    My Rig (Nothing overclocked):
    -Asus dual Gtx 1070 8gb
    -Asus B350-F Strix motherboard
    -Ryzen 1700 with wraith cooler
    -Viper Elite 2x8GB 2400mhz
    -EVGA 650W 80+ PSU
    -2x500GB 7200rpm WDB HDD
    -1TB 7200rpm WDB HDD
    -320gb 5400rpm WDB HDD
    -120GB SSD Kingston
    -NZXT H500
    -Some random self powered USB3.0 card for oculus sensors

    And yes Im using an oculus rift with 3 sensors.

    #11015
    Bla BlablaGreg Driver
    Keymaster

    i would like to see your configuration.
    can you please send me logs as described here?

    #11027
    Alex PotterAlex Potter
    Participant

    Hey Greg.
    I ended up uninstalling it and downgraded to 4.6 and that seems to work. Anything newer than that causes it to lag again.

    #11044
    Bla BlablaGreg Driver
    Keymaster

    hi.
    good you found solution. would you be ok to check with me a bit more where issue is? i would send you some versions to try.
    then you can get new features and updates.

    #11045
    Alex PotterAlex Potter
    Participant

    Yeah, I can do that. It wont be till later today when I get to my pc but I can test it for you. When I was trying different versions. 4.8 and 4.9 both did the same thing, dont know if that helps at all.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.