Homepage Forums Body tracking Hip Tracking with Nolo

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #6232

    Hi there,
    i noticed that the Hip isn’t in the right position as it should be..
    means: the hip glitches sometimes to the left and right side, so i can’t really set them up to work properly with avatars.
    I tried to only calibrate the hip, but it seems that to problem is still there.
    I hope than anyone has a solution for this..

    With friendly greets.

    Bla BlablaGreg Driver

    you mean glitches by rotation or position ?
    can you check if same happens in visualizer?

    PsymoN BondPsymoN

    Nolo headset marker use internal middle offset as is if mounted on headsets.
    For fix this, we need a modified firmware with removed internal offset.
    I dont found firmware with removed offset and keep searching.

    Our solution on this: first calibrate your nolo, and driver4vr too, then place headset marker less lower than you see and rotate at roll, if position matching, tune hip height in Driver4VR and enjoy.

    Bla BlablaGreg Driver

    i set this offset to zero.
    the problem you say was many months ago only for a short period.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.