Controllers position is wrong

[_I_TROLLFACE_I_]

Hi. Now I have another problem. In SteamVR my PS Move controllers moves in random direction. And it changes at every start. And they spawns behind me. For example, I move my hands forward and controllers fly backward. What should I do?

[Greg Driver]

you should calibrate headset with kinect.
depending on headset you have you might ensure it will start with same position.
for example dk2 when I always start facing kinect I don’t need calibrate it each time. for rift you can reset orientation in known direction.
i am looking for ways to improve it.

[_I_TROLLFACE_I_]

I don’t use kinect. I’m using FreePIE for position tracking.

[Greg Driver]

so you feed data to headset from psmove/freepie.
but headset also has orientation (where you are looking) you need align orientation of headset with kinect coordinates.

[Greg Driver]

ok. perhaps on my side something goes wrong. i will test more and update today.

[Greg Driver]

can you please send me steamvr.vrsettings?

[_I_TROLLFACE_I_]

That’s it

Attachments:

You must be logged in to view attached files.

[Greg Driver]

right now you have head tracking source set to off. what means you are not using tracking at all ? or is this any of last unrelated changes?

[Greg Driver]

here is updated version that should not have this problem.
at least I had this problem long time and was caused by some missconfiguration but it works now.
https://drive.google.com/file/d/1c2F_knXJ8cvc21rAwANpNc7kFRRE-aPJ/view?usp=sharing

[_I_TROLLFACE_I_]

Okay, I’ll try it now and write here after all. Thanks

[_I_TROLLFACE_I_]

Now I just played Bigscreen with Oculus DK2 positional tracking system (w/o PSMoveService).

[Greg Driver]

and?

[_I_TROLLFACE_I_]

Now Steam don’t see Driver4VR driver. I’m trying to reinstall it, but nothing happens.

[_I_TROLLFACE_I_]

If I try to do installation, it just duplicate SteamVR

Attachments:

You must be logged in to view attached files.

[_I_TROLLFACE_I_]

Here is the video with showing of problem

[Greg Driver]

you need align controlers with headset direction. this is required step at the very end of setup. press start+select on one controller when touching to headset like in this instruction video nearly at the end

[_I_TROLLFACE_I_]

Okay, but my head moves in wrong direction too

[Greg Driver]

ok.
so I start dk2 always front facing kinect. then I have no such problem.
if there is, you need go to settings next to head trackning and adjust manually angle.

[Greg Driver]

also it seems you are using very old version.
https://drive.google.com/file/d/1owP_Td2JRUXf2Nr2_sN1pSExJ7ZFtjZc/view?usp=sharing

[Greg Driver]

second option would be to take xbox pad and in oculus option select: settings->setup->sensor setup.
then you can setup dk2 to have front in same direction as kinect.
then when you start steamvr you also have it facing kinect.
that works for me 🙂

[Author]

Posts