Forum Replies Created
what is “GearVR controller with a freepie script to allow arm extension” ?
there are neural networks and spend lot of time on it but they don’t seem to work well enough for me and also leave some gpu for a game.
after you fix floor, need recalibrate avatar.
right now yu can only add custom binding from xbox controller or xinput device ot existing tracker. i don’t think it would be something you can do with ds4.
this ‘glitch’ is a protection to go outside play area.
i don’t want driver4vr to be this kind of utility 🙂
yes. but I would recommend extternal bluetooth like bt400
that is interesting. can you sens link to those clones?
no custom binding yet. on the todo list.
not yet. sorry 🙁
there is no such way unfortunatley. i think 3 ps eye setup should work quite well.
if that is psmoveservice i would rather search on their support group. i don’t have a complete support for that yet.
please send me info via contact form we can see what is problem.2020-05-05 at 07:24 in reply to: driver4VR was not detected. Please run Insteller or disable Safe Mode #14875
those are different problems. i have replied already to felipepassion.
Can you please send me logs as described here:
perhaps you activated tVR? if yes go to enable/disable tVR and turn off.
standard ps mouse here:
because you have driver4vr installed.
if you don’t want it then must uninstall.
because you must have enabled tVR. please go to enable/disable tvr and turn it off.2020-05-05 at 05:53 in reply to: Program crashes upon calibrating with camera markers #14867
does it work now ?
what window did you see the crash?
do you see skeleton in kinect preview? do you have hand tracking set to kinect: skeleton?
🙂2020-04-29 at 13:13 in reply to: Could it be possible to add freepie angle to HMD angles ? #14784
i tested vive, index, quest+link with 126.96.36.199. all of them work.
what is your headset and what input do you emulate?
do you hear haptic sound but it does not appear?
if yes, can you please restart driver4vr and check if this time will be detected?
also please confirm they are genuine.
don’t need ps eyes. other then that – yes.
i am on same setup and works fine. what exactly happens?
can you check if shaking of red rectangle is not related to your hand?
because when you use kinect + xbox controller then xbox controller is not really used for hand tracking. i realize that this might be confusing.
if you select virtual trackers for hand tracking then it will respond only to controller.2020-04-23 at 06:25 in reply to: Could it be possible to add freepie angle to HMD angles ? #14716
thanks for reply.
is there any other feature that I could add ?
are u on discord perhaps so I can drop you version for testing?2020-04-22 at 07:50 in reply to: Could it be possible to add freepie angle to HMD angles ? #14687
i want implement this now.
would that make sense to initiate rotation with either keyboard or joystick?
shoud the rotation immediately rerurn to original rotation when you release button?
can u try with software like AntiMicro if they appear and work?
right now there is no way to calibrate kinect leg tracking with psmoveservice.
unless you configure psmoveservice without driver4vr and use it only for body trkaing.
those were issues that when using for example mouse + kinect there were some of data still taken from mouse alone tracking. that sholud be already fixed.
can you please click refresh button? or once then connect, start steamvr and so driver4vr again ?2020-04-15 at 15:03 in reply to: Wiimote keeps blinking and not showing up in Detected devices #14602
hello. can u please try version 188.8.131.52 on a website. should have fix that address the problem.
hehe. that is so cool idea 🙂
not right now but I will think about this.
u say on the left there is no left controller?2020-04-15 at 14:08 in reply to: problem with snap tern button on psmove in the latest version of the driver4vr #14596
pls grab release from a website. fixed.
right now you can reset rotation with a button on joy-con.
i am working on some “things” to get this problem addressed in way that is better for users.
please download latest version. it is fixed.
did you try to click refresh?2020-04-15 at 13:45 in reply to: Are we going to get support for oculus rift s and touch controllers? #14586
how support? they are supported by oculus 😉
i think that will require 2 kinects.
calibrate for body tracking ? it is next to method selection. you need click and expand methods.
can u try if it will work without driver4vr first?
this would require some extra work and I have it on my list.
sorry for delay. i will reply to your email.2020-04-15 at 13:34 in reply to: Driver4Vr Not finding steamvr or vrwindow hkey error cant find steamvr #14579
ca you unintall and install again steamvr?
as tracker? can’t now.
can u please describe it in more details?
looks like bluetooth issue.
what other software do you use?