Forum Replies Created
-
Posts
-
Yeah, I have the same problem. This app helps in general but it’s very unstable mainly for that reason and that oddly my controllers keep losing connection and I have no idea why after 100’s of attempts to find a solution it’s just turned into nothing but headache after headache after headache. I am using Joycons as well and considering sending it back for either Leap Motion or PSmove for that reason. I know there’s the Recalibration button where after you start the driver it automatically tries to calibrate it or you can also click the re-calibrate but I spent an hour combing through and could not find it either. My guess is maybe the option was removed or left out of the latest version. It definitely doesn’t help that it has changed quite a bit compared to the videos found on Youtube and nothing to show what each does or for such.
There’s a video that shows Manual Calibration buttons that appear after disabling Steam’s VR Home Beta inside the Steam Settings (The YT Vid shows it appearing in D4VR after doing that) for something else so maybe it works that way, Idk, I’m too frustrated at this point to try to mess with it anymore.
Yeah, other than using the Driver4VR Contact Button their staff seems almost non-existent as far as I can tell. I think primarily one guy created the program but idk.
Anyhow, with me I ran into an issue where I realized my Joycons weren’t staying connected to my PC. Does your Joycons stay connected to your pc via Bluetooth? Check your Bluetooth Settings to see if it says Connected or Paired to verify it. If it’s connected then you need to open the program, enable the Joycon Support, and Detect the Joycons so they show up in the listing to assign to the Virtual Vive Trackers.
If it’s showing up as Paired and the Joycons turn off and don’t stay Connected then you have the exact same problem that I have most likely. It’s not the Driver4VR causing this issue although it would help if they would program it similarly to bridge that connection. I am pretty sure it’s actually some weird issue with Windows Drivers that Microsoft/Third-Parties screwed up again. So if this is the case then you can try a workaround to force the connection that I found yesterday by accident. What I did is I installed BetterJoyforCemu. I then used that to force the Joycons to stay Connected to my PC. I then closed the BetterJoyforCemu Program. The Joycons should stay Connected to your PC. I am unsure if this is or will be the case for your end. After that I found I could then use it properly in Driver4VR and it would recognize them so I could assign and use them. Just pay attention to which way you have your controllers turned when calibrating them. I realized that this also affects how they appear on the VR Screen while trying to play. They don’t work perfectly but they do work decently. I also realized in a recent video the Driver4VR dev sets the Arm/Hand Tracking to 50, 35, 45, and 0 but that may vary for you.
Hmmm, I am in the same boat. I bought a pair of joycons just for the motion control but have noticed that my hands and arms are completely backwards behind my character which is frustrating and the documentation here is confusing as ever. I just don’t understand how to get the hands and arms to be normalized in front of me after mucking around with it for a few hours to the point I had to give up because I wanted to throw my computer and the controllers out the window. I think I watched some 100+ videos on youtube trying to understand and find a solution. When I follow the instructions the first time I was able to get it to sync and work and move but could not use anything due to having it backwards. Then when I disconnected I couldn’t reconnect so I tried again and same issue. I am hoping it was because the controllers weren’t charged and I haven’t tried again. I too have tried BetterJoy for Cemu and noticed that syncs up almost right away. I’d like to know a good configuration for this in the joycon controller config for the driver while sitting because it still makes no sense to me.