Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 2018-09-25 at 20:54 in reply to: Kinect V2 + Kinect: Led light / ball #5421
    autoexec batautoexec bat
    Participant

    Hello Greg
    I have made a bios update and uninstalled all USB controllers. The Kinect stays on now, but still too little FPS (Kinect 14 FPS with colortracking). I have tried all USB 3.0 10x ports (Front, Main, PCIe), all have only 14 FPS.
    Is there still another way to accelerate color tracking with the Kinect V2?

    2018-09-23 at 22:42 in reply to: Kinect V2 + Kinect: Led light / ball #5412
    autoexec batautoexec bat
    Participant

    Update:
    The kinect always turns on and off.

    2018-09-18 at 22:39 in reply to: Leap Motion + psmove controllers #5401
    autoexec batautoexec bat
    Participant

    Hi Greg again
    I tried it with antimicro without success:(

    Can you please do a little step by step guide?
    I would like to see where the mistake is.

    How do I solve this, that the PSMove controller works together with the Bluetooth (only the axis control)?
    For example: if I press PSMove touch and control the direction of the touch with Bluetooth controller.

    Tracking / Hand controllers: Leap Motion selected
    PS Move / ON selected in Device Manager – Pairing / Calibration done
    Controllers: ID1 – dv4vr_left – PSMove-0 done (to understand, there must only be one)

    What should I do next?

    Thank you in advance

    2018-09-18 at 17:40 in reply to: PSMove? use_spatial_offset_after_touchpad_press_as_touchpad_axis #5400
    autoexec batautoexec bat
    Participant

    Hi
    Yes of course you are right. I did not think about that😅. Thank you Greg👍

    2018-09-15 at 01:35 in reply to: Leap Motion + psmove controllers #5389
    autoexec batautoexec bat
    Participant

    Unfortunately, this does not work anymore, I hope in the future there will be improved.

    2018-09-12 at 23:28 in reply to: Leap motion command for 180 degrees rotation #5382
    autoexec batautoexec bat
    Participant

    Hi
    In Leap Motion Visualizer, the bones are displayed correctly.
    When I use the port on the right side, my hands in VRChat are always over cross. Turn the leap motion controller 180 degrees, everything is fine.
    best regards

    2018-09-12 at 01:31 in reply to: VR Bluetooth Controller buttons double occupied #5369
    autoexec batautoexec bat
    Participant

    omg I’ve just tried the PS Move Controller and I have to say it’s really fun.
    I love Driver4VR

    2018-09-11 at 17:43 in reply to: VR Bluetooth Controller buttons double occupied #5365
    autoexec batautoexec bat
    Participant

    Hello Greg
    Yes, done without success.
    After that I have uninstalled Steam(VR), Driver4VR and all the input devices removed in the Device Manager and again the same result.
    I’ll try further

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)