Homepage Forums How-to and troubleshooting "Vive Trackers" Rarely appear

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #1853
    eloderungeloderung
    Participant

    Heya,

    So I was able to sort of get the program working, but only once.

    Steam VR detects three Vive trackers and my normal Oculus equipment. The calibration runs fine/smoothly every single time. I start the driver4vr service or have it set on auto-run. I have trackers enabled.

    For some reason, the Vive “trackers” rarely appear. It’s like they are never created after calibration. I was only able to get them to appear once and I have no idea how or why it happened. (And the time that happened, my hip and feet were both offset by about a foot horizontally).

    I’ve tried three different Kinect 360 positions, uninstalled/reinstalled drivers, re-ran Steam VR setup in full, uninstalled steam VR usb drivers, uninstalled/reinstalled the driver4vr drivers, and tried various Kinect angles.

    VRChat will detect that I’m in full body tracking mode when the “trackers” never created, but they don’t actually track resulting my avatar to fall into the floor.

    Here are some logs:
    2018-01-03 20:12:43: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:12:45: Creating communication thread…
    2018-01-03 20:12:45: Creating communication done…
    2018-01-03 20:12:45: Initialize communication thread.
    2018-01-03 20:12:45: Communication thread test start – #1
    2018-01-03 20:12:46: VRPath reg output:

    2018-01-03 20:12:46: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:12:46: Start/Stop sequence starting.
    2018-01-03 20:12:46: Kinect 360 Runtime detected: True
    2018-01-03 20:12:46: Kinect One Runtime detected: False
    2018-01-03 20:12:46: Kinect 360 – Starting connection.
    2018-01-03 20:12:46: Kinect 360 – found!.
    2018-01-03 20:12:46: Kinect 360 – connected.
    2018-01-03 20:12:46: Creating processing thread… start.
    2018-01-03 20:12:46: Creating processing thread… done.
    2018-01-03 20:12:46: Initialize processing thread.
    2018-01-03 20:12:46: Sending communication to start driver – start.
    2018-01-03 20:12:46: Sending communication to start driver – complete.
    2018-01-03 20:12:46: Start/Stop sequence done.
    2018-01-03 20:12:46: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:12:47: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 20:12:47: Enumeration of devices starting… with 0
    2018-01-03 20:12:47: PS Move Service not required… skipping.
    2018-01-03 20:12:47: Daydream enumeration beging with already 0 devices.
    2018-01-03 20:12:47: Daydream enumeration complete with 0 devices.
    2018-01-03 20:12:47: GearVR enumeration beging with already 0 devices.
    2018-01-03 20:12:47: Tracker update test start – #1
    2018-01-03 20:12:47: GearVR enumeration complete with 0 devices.
    2018-01-03 20:12:47: Enumeration of devices starting completed with 0 total.
    2018-01-03 20:12:47: Starting devices…
    2018-01-03 20:12:47: Starting devices complete
    2018-01-03 20:12:47: Tracker update test end – #1
    2018-01-03 20:12:47: Tracker update test start – #2
    2018-01-03 20:12:47: Tracker update test end – #2
    2018-01-03 20:12:47: Tracker update test start – #3
    2018-01-03 20:12:47: Tracker update test end – #3
    2018-01-03 20:12:47: Tracker update test start – #4
    2018-01-03 20:12:47: Tracker update test end – #4
    2018-01-03 20:12:47: Tracker update test start – #5
    2018-01-03 20:12:47: Tracker update test end – #5
    2018-01-03 20:12:50: Communication thread test end – #1
    2018-01-03 20:12:50: Communication thread test start – #2
    2018-01-03 20:12:55: Communication thread test end – #2
    2018-01-03 20:12:55: Communication thread test start – #3
    2018-01-03 20:13:00: Communication thread test end – #3
    2018-01-03 20:13:00: Communication thread test start – #4
    2018-01-03 20:13:05: Communication thread test end – #4
    2018-01-03 20:13:05: Communication thread test start – #5
    2018-01-03 20:13:10: Communication thread test end – #5
    2018-01-03 20:22:02: Start/Stop sequence starting.
    2018-01-03 20:22:02: Start/Stop sequence done.
    2018-01-03 20:22:03: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:22:16: Shutdown of driver4vr application has been completed.
    2018-01-03 20:22:37: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:22:38: Creating communication thread…
    2018-01-03 20:22:38: Creating communication done…
    2018-01-03 20:22:38: Initialize communication thread.
    2018-01-03 20:22:38: Communication thread test start – #1
    2018-01-03 20:22:39: VRPath reg output:

    2018-01-03 20:22:39: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:22:39: Start/Stop sequence starting.
    2018-01-03 20:22:39: Kinect 360 Runtime detected: True
    2018-01-03 20:22:39: Kinect One Runtime detected: False
    2018-01-03 20:22:39: Kinect 360 – Starting connection.
    2018-01-03 20:22:39: Kinect 360 – found!.
    2018-01-03 20:22:40: Kinect 360 – connected.
    2018-01-03 20:22:40: Creating processing thread… start.
    2018-01-03 20:22:40: Creating processing thread… done.
    2018-01-03 20:22:40: Initialize processing thread.
    2018-01-03 20:22:40: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:22:43: Communication thread test end – #1
    2018-01-03 20:22:43: Communication thread test start – #2
    2018-01-03 20:22:48: Communication thread test end – #2
    2018-01-03 20:22:48: Communication thread test start – #3
    2018-01-03 20:22:53: Sending communication to start driver – start.
    2018-01-03 20:22:53: Sending communication to start driver – complete.
    2018-01-03 20:22:53: Start/Stop sequence done.
    2018-01-03 20:22:53: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 20:22:53: Enumeration of devices starting… with 0
    2018-01-03 20:22:53: PS Move Service not required… skipping.
    2018-01-03 20:22:53: Daydream enumeration beging with already 0 devices.
    2018-01-03 20:22:53: Daydream enumeration complete with 0 devices.
    2018-01-03 20:22:53: GearVR enumeration beging with already 0 devices.
    2018-01-03 20:22:53: Tracker update test start – #1
    2018-01-03 20:22:53: GearVR enumeration complete with 0 devices.
    2018-01-03 20:22:53: Enumeration of devices starting completed with 0 total.
    2018-01-03 20:22:53: Starting devices…
    2018-01-03 20:22:53: Starting devices complete
    2018-01-03 20:22:53: Tracker update test end – #1
    2018-01-03 20:22:53: Tracker update test start – #2
    2018-01-03 20:22:53: Tracker update test end – #2
    2018-01-03 20:22:53: Tracker update test start – #3
    2018-01-03 20:22:53: Tracker update test end – #3
    2018-01-03 20:22:53: Tracker update test start – #4
    2018-01-03 20:22:53: Tracker update test end – #4
    2018-01-03 20:22:53: Tracker update test start – #5
    2018-01-03 20:22:53: Tracker update test end – #5
    2018-01-03 20:22:53: Communication thread test end – #3
    2018-01-03 20:22:53: Communication thread test start – #4
    2018-01-03 20:22:58: Communication thread test end – #4
    2018-01-03 20:22:58: Communication thread test start – #5
    2018-01-03 20:23:04: Communication thread test end – #5
    2018-01-03 20:24:17: Start/Stop sequence starting.
    2018-01-03 20:24:17: Start/Stop sequence done.
    2018-01-03 20:24:17: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:24:28: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:24:29: Creating communication thread…
    2018-01-03 20:24:29: Creating communication done…
    2018-01-03 20:24:29: Initialize communication thread.
    2018-01-03 20:24:29: Communication thread test start – #1
    2018-01-03 20:24:30: VRPath reg output:

    2018-01-03 20:24:30: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:24:30: Start/Stop sequence starting.
    2018-01-03 20:24:30: Kinect 360 Runtime detected: True
    2018-01-03 20:24:30: Kinect One Runtime detected: False
    2018-01-03 20:24:30: Kinect 360 – Starting connection.
    2018-01-03 20:24:30: Kinect 360 – found!.
    2018-01-03 20:24:30: Kinect 360 – connected.
    2018-01-03 20:24:31: Creating processing thread… start.
    2018-01-03 20:24:31: Creating processing thread… done.
    2018-01-03 20:24:31: Initialize processing thread.
    2018-01-03 20:24:31: Sending communication to start driver – start.
    2018-01-03 20:24:31: Sending communication to start driver – complete.
    2018-01-03 20:24:31: Start/Stop sequence done.
    2018-01-03 20:24:31: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:24:31: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 20:24:31: Enumeration of devices starting… with 0
    2018-01-03 20:24:31: PS Move Service not required… skipping.
    2018-01-03 20:24:31: Daydream enumeration beging with already 0 devices.
    2018-01-03 20:24:31: Daydream enumeration complete with 0 devices.
    2018-01-03 20:24:31: GearVR enumeration beging with already 0 devices.
    2018-01-03 20:24:31: GearVR enumeration complete with 0 devices.
    2018-01-03 20:24:31: Enumeration of devices starting completed with 0 total.
    2018-01-03 20:24:31: Starting devices…
    2018-01-03 20:24:31: Starting devices complete
    2018-01-03 20:24:31: Tracker update test start – #1
    2018-01-03 20:24:31: Tracker update test end – #1
    2018-01-03 20:24:31: Tracker update test start – #2
    2018-01-03 20:24:31: Tracker update test end – #2
    2018-01-03 20:24:31: Tracker update test start – #3
    2018-01-03 20:24:31: Tracker update test end – #3
    2018-01-03 20:24:31: Tracker update test start – #4
    2018-01-03 20:24:31: Tracker update test end – #4
    2018-01-03 20:24:31: Tracker update test start – #5
    2018-01-03 20:24:31: Tracker update test end – #5
    2018-01-03 20:24:34: Communication thread test end – #1
    2018-01-03 20:24:34: Communication thread test start – #2
    2018-01-03 20:24:37: Start/Stop sequence starting.
    2018-01-03 20:24:37: Start/Stop sequence done.
    2018-01-03 20:24:38: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:24:39: Communication thread test end – #2
    2018-01-03 20:24:39: Communication thread test start – #3
    2018-01-03 20:24:44: Communication thread test end – #3
    2018-01-03 20:24:44: Communication thread test start – #4
    2018-01-03 20:24:46: Shutdown of driver4vr application has been completed.
    2018-01-03 20:24:59: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:25:01: Creating communication thread…
    2018-01-03 20:25:01: Creating communication done…
    2018-01-03 20:25:01: Initialize communication thread.
    2018-01-03 20:25:01: Communication thread test start – #1
    2018-01-03 20:25:01: VRPath reg output:

    2018-01-03 20:25:01: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:25:01: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:25:06: Communication thread test end – #1
    2018-01-03 20:25:06: Communication thread test start – #2
    2018-01-03 20:25:10: Start/Stop sequence starting.
    2018-01-03 20:25:10: Kinect 360 Runtime detected: True
    2018-01-03 20:25:10: Kinect One Runtime detected: False
    2018-01-03 20:25:10: Kinect 360 – Starting connection.
    2018-01-03 20:25:10: Kinect 360 – found!.
    2018-01-03 20:25:10: Kinect 360 – connected.
    2018-01-03 20:25:10: Creating processing thread… start.
    2018-01-03 20:25:10: Creating processing thread… done.
    2018-01-03 20:25:10: Sending communication to start driver – start.
    2018-01-03 20:25:10: Initialize processing thread.
    2018-01-03 20:25:10: Sending communication to start driver – complete.
    2018-01-03 20:25:10: Start/Stop sequence done.
    2018-01-03 20:25:10: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 20:25:10: Enumeration of devices starting… with 0
    2018-01-03 20:25:10: PS Move Service not required… skipping.
    2018-01-03 20:25:10: Daydream enumeration beging with already 0 devices.
    2018-01-03 20:25:10: Daydream enumeration complete with 0 devices.
    2018-01-03 20:25:10: GearVR enumeration beging with already 0 devices.
    2018-01-03 20:25:10: GearVR enumeration complete with 0 devices.
    2018-01-03 20:25:10: Enumeration of devices starting completed with 0 total.
    2018-01-03 20:25:10: Starting devices…
    2018-01-03 20:25:10: Starting devices complete
    2018-01-03 20:25:10: Tracker update test start – #1
    2018-01-03 20:25:10: Tracker update test end – #1
    2018-01-03 20:25:10: Tracker update test start – #2
    2018-01-03 20:25:10: Tracker update test end – #2
    2018-01-03 20:25:10: Tracker update test start – #3
    2018-01-03 20:25:10: Tracker update test end – #3
    2018-01-03 20:25:10: Tracker update test start – #4
    2018-01-03 20:25:10: Tracker update test end – #4
    2018-01-03 20:25:10: Tracker update test start – #5
    2018-01-03 20:25:10: Tracker update test end – #5
    2018-01-03 20:25:11: Communication thread test end – #2
    2018-01-03 20:25:11: Communication thread test start – #3
    2018-01-03 20:25:16: Communication thread test end – #3
    2018-01-03 20:25:16: Communication thread test start – #4
    2018-01-03 20:25:21: Communication thread test end – #4
    2018-01-03 20:25:21: Communication thread test start – #5
    2018-01-03 20:25:26: Communication thread test end – #5
    2018-01-03 20:30:19: Start/Stop sequence starting.
    2018-01-03 20:30:19: Start/Stop sequence done.
    2018-01-03 20:30:20: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:35:01: Shutdown of driver4vr application has been completed.
    2018-01-03 20:41:21: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:41:23: Creating communication thread…
    2018-01-03 20:41:23: Creating communication done…
    2018-01-03 20:41:23: Initialize communication thread.
    2018-01-03 20:41:23: Communication thread test start – #1
    2018-01-03 20:41:23: VRPath reg output:

    2018-01-03 20:41:23: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:41:23: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:41:26: Communication thread test end – #1
    2018-01-03 20:41:26: Communication thread test start – #2
    2018-01-03 20:41:31: Communication thread test end – #2
    2018-01-03 20:41:31: Communication thread test start – #3
    2018-01-03 20:41:36: Communication thread test end – #3
    2018-01-03 20:41:36: Communication thread test start – #4
    2018-01-03 20:41:41: Communication thread test end – #4
    2018-01-03 20:41:41: Communication thread test start – #5
    2018-01-03 20:41:46: Communication thread test end – #5
    2018-01-03 20:46:27: Start/Stop sequence starting.
    2018-01-03 20:46:27: Kinect 360 Runtime detected: True
    2018-01-03 20:46:27: Kinect One Runtime detected: False
    2018-01-03 20:46:27: Kinect 360 – Starting connection.
    2018-01-03 20:46:27: Kinect 360 – found!.
    2018-01-03 20:46:27: Kinect 360 – connected.
    2018-01-03 20:46:28: Creating processing thread… start.
    2018-01-03 20:46:28: Creating processing thread… done.
    2018-01-03 20:46:28: Sending communication to start driver – start.
    2018-01-03 20:46:28: Initialize processing thread.
    2018-01-03 20:46:28: Sending communication to start driver – complete.
    2018-01-03 20:46:28: Start/Stop sequence done.
    2018-01-03 20:46:28: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 20:46:28: Enumeration of devices starting… with 0
    2018-01-03 20:46:28: PS Move Service not required… skipping.
    2018-01-03 20:46:28: Daydream enumeration beging with already 0 devices.
    2018-01-03 20:46:28: Daydream enumeration complete with 0 devices.
    2018-01-03 20:46:28: Tracker update test start – #1
    2018-01-03 20:46:28: GearVR enumeration beging with already 0 devices.
    2018-01-03 20:46:28: GearVR enumeration complete with 0 devices.
    2018-01-03 20:46:28: Enumeration of devices starting completed with 0 total.
    2018-01-03 20:46:28: Starting devices…
    2018-01-03 20:46:28: Starting devices complete
    2018-01-03 20:46:28: Tracker update test end – #1
    2018-01-03 20:46:28: Tracker update test start – #2
    2018-01-03 20:46:28: Tracker update test end – #2
    2018-01-03 20:46:28: Tracker update test start – #3
    2018-01-03 20:46:28: Tracker update test end – #3
    2018-01-03 20:46:28: Tracker update test start – #4
    2018-01-03 20:46:28: Tracker update test end – #4
    2018-01-03 20:46:28: Tracker update test start – #5
    2018-01-03 20:46:28: Tracker update test end – #5
    2018-01-03 20:51:44: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:51:46: Creating communication thread…
    2018-01-03 20:51:46: Creating communication done…
    2018-01-03 20:51:46: Initialize communication thread.
    2018-01-03 20:51:46: Communication thread test start – #1
    2018-01-03 20:51:47: VRPath reg output:

    2018-01-03 20:51:47: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:51:47: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:51:51: Communication thread test end – #1
    2018-01-03 20:51:51: Communication thread test start – #2
    2018-01-03 20:51:56: Communication thread test end – #2
    2018-01-03 20:51:56: Communication thread test start – #3
    2018-01-03 20:52:01: Communication thread test end – #3
    2018-01-03 20:52:01: Communication thread test start – #4
    2018-01-03 20:52:04: Start/Stop sequence starting.
    2018-01-03 20:52:04: Kinect 360 Runtime detected: True
    2018-01-03 20:52:04: Kinect One Runtime detected: False
    2018-01-03 20:52:04: Kinect 360 – Starting connection.
    2018-01-03 20:52:04: Kinect 360 – found!.
    2018-01-03 20:52:05: Kinect 360 – connected.
    2018-01-03 20:52:05: Creating processing thread… start.
    2018-01-03 20:52:05: Creating processing thread… done.
    2018-01-03 20:52:05: Sending communication to start driver – start.
    2018-01-03 20:52:05: Initialize processing thread.
    2018-01-03 20:52:05: Sending communication to start driver – complete.
    2018-01-03 20:52:05: Start/Stop sequence done.
    2018-01-03 20:52:05: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 20:52:05: Enumeration of devices starting… with 0
    2018-01-03 20:52:05: PS Move Service not required… skipping.
    2018-01-03 20:52:05: Daydream enumeration beging with already 0 devices.
    2018-01-03 20:52:05: Daydream enumeration complete with 0 devices.
    2018-01-03 20:52:05: GearVR enumeration beging with already 0 devices.
    2018-01-03 20:52:05: Tracker update test start – #1
    2018-01-03 20:52:05: GearVR enumeration complete with 0 devices.
    2018-01-03 20:52:05: Enumeration of devices starting completed with 0 total.
    2018-01-03 20:52:05: Starting devices…
    2018-01-03 20:52:05: Starting devices complete
    2018-01-03 20:52:05: Tracker update test end – #1
    2018-01-03 20:52:05: Tracker update test start – #2
    2018-01-03 20:52:05: Tracker update test end – #2
    2018-01-03 20:52:05: Tracker update test start – #3
    2018-01-03 20:52:05: Tracker update test end – #3
    2018-01-03 20:52:05: Tracker update test start – #4
    2018-01-03 20:52:05: Tracker update test end – #4
    2018-01-03 20:52:05: Tracker update test start – #5
    2018-01-03 20:52:05: Tracker update test end – #5
    2018-01-03 20:52:06: Communication thread test end – #4
    2018-01-03 20:52:06: Communication thread test start – #5
    2018-01-03 20:52:11: Communication thread test end – #5
    2018-01-03 20:58:49: Start/Stop sequence starting.
    2018-01-03 20:58:49: Start/Stop sequence done.
    2018-01-03 20:58:49: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:59:31: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 20:59:33: Creating communication thread…
    2018-01-03 20:59:33: Creating communication done…
    2018-01-03 20:59:33: Initialize communication thread.
    2018-01-03 20:59:33: Communication thread test start – #1
    2018-01-03 20:59:33: VRPath reg output:

    2018-01-03 20:59:33: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 20:59:33: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 20:59:38: Communication thread test end – #1
    2018-01-03 20:59:38: Communication thread test start – #2
    2018-01-03 20:59:43: Communication thread test end – #2
    2018-01-03 20:59:43: Communication thread test start – #3
    2018-01-03 20:59:48: Communication thread test end – #3
    2018-01-03 20:59:48: Communication thread test start – #4
    2018-01-03 20:59:53: Communication thread test end – #4
    2018-01-03 20:59:53: Communication thread test start – #5
    2018-01-03 21:00:01: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:00:03: Creating communication thread…
    2018-01-03 21:00:03: Creating communication done…
    2018-01-03 21:00:03: Initialize communication thread.
    2018-01-03 21:00:03: Communication thread test start – #1
    2018-01-03 21:00:03: VRPath reg output:

    2018-01-03 21:00:03: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:00:03: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:00:06: Communication thread test end – #1
    2018-01-03 21:00:06: Communication thread test start – #2
    2018-01-03 21:00:11: Communication thread test end – #2
    2018-01-03 21:00:11: Communication thread test start – #3
    2018-01-03 21:00:16: Communication thread test end – #3
    2018-01-03 21:00:16: Communication thread test start – #4
    2018-01-03 21:00:21: Communication thread test end – #4
    2018-01-03 21:00:21: Communication thread test start – #5
    2018-01-03 21:00:22: Start/Stop sequence starting.
    2018-01-03 21:00:22: Kinect 360 Runtime detected: True
    2018-01-03 21:00:22: Kinect One Runtime detected: False
    2018-01-03 21:00:22: Kinect 360 – Starting connection.
    2018-01-03 21:00:22: Kinect 360 – found!.
    2018-01-03 21:00:22: Kinect 360 – connected.
    2018-01-03 21:00:22: Creating processing thread… start.
    2018-01-03 21:00:22: Creating processing thread… done.
    2018-01-03 21:00:22: Initialize processing thread.
    2018-01-03 21:00:22: Sending communication to start driver – start.
    2018-01-03 21:00:22: Sending communication to start driver – complete.
    2018-01-03 21:00:22: Start/Stop sequence done.
    2018-01-03 21:00:22: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:00:22: Enumeration of devices starting… with 0
    2018-01-03 21:00:22: PS Move Service not required… skipping.
    2018-01-03 21:00:22: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:00:22: Daydream enumeration complete with 0 devices.
    2018-01-03 21:00:22: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:00:22: Tracker update test start – #1
    2018-01-03 21:00:22: GearVR enumeration complete with 0 devices.
    2018-01-03 21:00:22: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:00:22: Starting devices…
    2018-01-03 21:00:22: Starting devices complete
    2018-01-03 21:00:22: Tracker update test end – #1
    2018-01-03 21:00:22: Tracker update test start – #2
    2018-01-03 21:00:22: Tracker update test end – #2
    2018-01-03 21:00:22: Tracker update test start – #3
    2018-01-03 21:00:22: Tracker update test end – #3
    2018-01-03 21:00:22: Tracker update test start – #4
    2018-01-03 21:00:22: Tracker update test end – #4
    2018-01-03 21:00:22: Tracker update test start – #5
    2018-01-03 21:00:22: Tracker update test end – #5
    2018-01-03 21:00:26: Communication thread test end – #5
    2018-01-03 21:01:15: Start/Stop sequence starting.
    2018-01-03 21:01:15: Start/Stop sequence done.
    2018-01-03 21:01:16: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:01:21: Shutdown of driver4vr application has been completed.
    2018-01-03 21:01:36: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:01:38: Creating communication thread…
    2018-01-03 21:01:38: Creating communication done…
    2018-01-03 21:01:38: Initialize communication thread.
    2018-01-03 21:01:38: Communication thread test start – #1
    2018-01-03 21:01:39: VRPath reg output:

    2018-01-03 21:01:39: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:01:39: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:01:43: Communication thread test end – #1
    2018-01-03 21:01:43: Communication thread test start – #2
    2018-01-03 21:01:48: Communication thread test end – #2
    2018-01-03 21:01:48: Communication thread test start – #3
    2018-01-03 21:01:53: Communication thread test end – #3
    2018-01-03 21:01:53: Communication thread test start – #4
    2018-01-03 21:01:58: Communication thread test end – #4
    2018-01-03 21:01:58: Communication thread test start – #5
    2018-01-03 21:02:01: Start/Stop sequence starting.
    2018-01-03 21:02:02: Kinect 360 Runtime detected: True
    2018-01-03 21:02:02: Kinect One Runtime detected: False
    2018-01-03 21:02:02: Kinect 360 – Starting connection.
    2018-01-03 21:02:02: Kinect 360 – found!.
    2018-01-03 21:02:02: Kinect 360 – connected.
    2018-01-03 21:02:02: Creating processing thread… start.
    2018-01-03 21:02:02: Creating processing thread… done.
    2018-01-03 21:02:02: Sending communication to start driver – start.
    2018-01-03 21:02:02: Sending communication to start driver – complete.
    2018-01-03 21:02:02: Initialize processing thread.
    2018-01-03 21:02:02: Start/Stop sequence done.
    2018-01-03 21:02:02: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:02:02: Enumeration of devices starting… with 0
    2018-01-03 21:02:02: PS Move Service not required… skipping.
    2018-01-03 21:02:02: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:02:02: Daydream enumeration complete with 0 devices.
    2018-01-03 21:02:02: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:02:02: GearVR enumeration complete with 0 devices.
    2018-01-03 21:02:02: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:02:02: Starting devices…
    2018-01-03 21:02:02: Starting devices complete
    2018-01-03 21:02:02: Tracker update test start – #1
    2018-01-03 21:02:02: Tracker update test end – #1
    2018-01-03 21:02:02: Tracker update test start – #2
    2018-01-03 21:02:02: Tracker update test end – #2
    2018-01-03 21:02:02: Tracker update test start – #3
    2018-01-03 21:02:02: Tracker update test end – #3
    2018-01-03 21:02:02: Tracker update test start – #4
    2018-01-03 21:02:02: Tracker update test end – #4
    2018-01-03 21:02:02: Tracker update test start – #5
    2018-01-03 21:02:02: Tracker update test end – #5
    2018-01-03 21:02:03: Communication thread test end – #5
    2018-01-03 21:10:55: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:10:57: Creating communication thread…
    2018-01-03 21:10:57: Creating communication done…
    2018-01-03 21:10:57: Initialize communication thread.
    2018-01-03 21:10:57: Communication thread test start – #1
    2018-01-03 21:10:58: VRPath reg output:

    2018-01-03 21:10:58: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:10:58: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:11:02: Communication thread test end – #1
    2018-01-03 21:11:02: Communication thread test start – #2
    2018-01-03 21:11:04: Start/Stop sequence starting.
    2018-01-03 21:11:04: Kinect 360 Runtime detected: True
    2018-01-03 21:11:04: Kinect One Runtime detected: False
    2018-01-03 21:11:04: Kinect 360 – Starting connection.
    2018-01-03 21:11:04: Kinect 360 – found!.
    2018-01-03 21:11:04: Kinect 360 – connected.
    2018-01-03 21:11:04: Creating processing thread… start.
    2018-01-03 21:11:04: Creating processing thread… done.
    2018-01-03 21:11:04: Sending communication to start driver – start.
    2018-01-03 21:11:04: Initialize processing thread.
    2018-01-03 21:11:04: Sending communication to start driver – complete.
    2018-01-03 21:11:04: Start/Stop sequence done.
    2018-01-03 21:11:04: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:11:04: Enumeration of devices starting… with 0
    2018-01-03 21:11:04: PS Move Service not required… skipping.
    2018-01-03 21:11:04: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:11:04: Daydream enumeration complete with 0 devices.
    2018-01-03 21:11:04: Tracker update test start – #1
    2018-01-03 21:11:04: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:11:04: GearVR enumeration complete with 0 devices.
    2018-01-03 21:11:04: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:11:04: Starting devices…
    2018-01-03 21:11:04: Starting devices complete
    2018-01-03 21:11:04: Tracker update test end – #1
    2018-01-03 21:11:04: Tracker update test start – #2
    2018-01-03 21:11:04: Tracker update test end – #2
    2018-01-03 21:11:04: Tracker update test start – #3
    2018-01-03 21:11:04: Tracker update test end – #3
    2018-01-03 21:11:04: Tracker update test start – #4
    2018-01-03 21:11:04: Tracker update test end – #4
    2018-01-03 21:11:04: Tracker update test start – #5
    2018-01-03 21:11:04: Tracker update test end – #5
    2018-01-03 21:11:07: Communication thread test end – #2
    2018-01-03 21:11:07: Communication thread test start – #3
    2018-01-03 21:11:12: Communication thread test end – #3
    2018-01-03 21:11:12: Communication thread test start – #4
    2018-01-03 21:11:17: Communication thread test end – #4
    2018-01-03 21:11:17: Communication thread test start – #5
    2018-01-03 21:11:22: Communication thread test end – #5
    2018-01-03 21:12:56: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:12:59: Creating communication thread…
    2018-01-03 21:12:59: Creating communication done…
    2018-01-03 21:12:59: Initialize communication thread.
    2018-01-03 21:12:59: Communication thread test start – #1
    2018-01-03 21:12:59: VRPath reg output:

    2018-01-03 21:12:59: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:12:59: Start/Stop sequence starting.
    2018-01-03 21:12:59: Kinect 360 Runtime detected: True
    2018-01-03 21:12:59: Kinect One Runtime detected: False
    2018-01-03 21:12:59: Kinect 360 – Starting connection.
    2018-01-03 21:12:59: Kinect 360 – found!.
    2018-01-03 21:12:59: Kinect 360 – connected.
    2018-01-03 21:12:59: Creating processing thread… start.
    2018-01-03 21:12:59: Creating processing thread… done.
    2018-01-03 21:12:59: Initialize processing thread.
    2018-01-03 21:12:59: Sending communication to start driver – start.
    2018-01-03 21:12:59: Sending communication to start driver – complete.
    2018-01-03 21:12:59: Start/Stop sequence done.
    2018-01-03 21:12:59: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:13:00: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:13:00: Enumeration of devices starting… with 0
    2018-01-03 21:13:00: PS Move Service not required… skipping.
    2018-01-03 21:13:00: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:13:00: Daydream enumeration complete with 0 devices.
    2018-01-03 21:13:00: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:13:00: GearVR enumeration complete with 0 devices.
    2018-01-03 21:13:00: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:13:00: Starting devices…
    2018-01-03 21:13:00: Starting devices complete
    2018-01-03 21:13:00: Tracker update test start – #1
    2018-01-03 21:13:00: Tracker update test end – #1
    2018-01-03 21:13:00: Tracker update test start – #2
    2018-01-03 21:13:00: Tracker update test end – #2
    2018-01-03 21:13:00: Tracker update test start – #3
    2018-01-03 21:13:00: Tracker update test end – #3
    2018-01-03 21:13:00: Tracker update test start – #4
    2018-01-03 21:13:00: Tracker update test end – #4
    2018-01-03 21:13:00: Tracker update test start – #5
    2018-01-03 21:13:00: Tracker update test end – #5
    2018-01-03 21:13:01: Communication thread test end – #1
    2018-01-03 21:13:01: Communication thread test start – #2
    2018-01-03 21:13:06: Communication thread test end – #2
    2018-01-03 21:13:06: Communication thread test start – #3
    2018-01-03 21:13:11: Communication thread test end – #3
    2018-01-03 21:13:11: Communication thread test start – #4
    2018-01-03 21:13:16: Communication thread test end – #4
    2018-01-03 21:13:16: Communication thread test start – #5
    2018-01-03 21:13:21: Communication thread test end – #5
    2018-01-03 21:14:28: Start/Stop sequence starting.
    2018-01-03 21:14:28: Start/Stop sequence done.
    2018-01-03 21:14:28: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:14:29: Start/Stop sequence starting.
    2018-01-03 21:14:29: Sending communication to start driver – start.
    2018-01-03 21:14:29: Sending communication to start driver – complete.
    2018-01-03 21:14:29: Start/Stop sequence done.
    2018-01-03 21:14:30: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:14:30: Enumeration of devices starting… with 0
    2018-01-03 21:14:30: PS Move Service not required… skipping.
    2018-01-03 21:14:30: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:14:30: Daydream enumeration complete with 0 devices.
    2018-01-03 21:14:30: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:14:30: GearVR enumeration complete with 0 devices.
    2018-01-03 21:14:30: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:14:30: Starting devices…
    2018-01-03 21:14:30: Starting devices complete
    2018-01-03 21:21:15: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:21:17: Creating communication thread…
    2018-01-03 21:21:17: Creating communication done…
    2018-01-03 21:21:17: Initialize communication thread.
    2018-01-03 21:21:17: Communication thread test start – #1
    2018-01-03 21:21:17: VRPath reg output:

    2018-01-03 21:21:17: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:21:18: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:21:22: Communication thread test end – #1
    2018-01-03 21:21:22: Communication thread test start – #2
    2018-01-03 21:21:27: Communication thread test end – #2
    2018-01-03 21:21:27: Communication thread test start – #3
    2018-01-03 21:21:27: Shutdown of driver4vr application has been completed.
    2018-01-03 21:21:40: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:21:41: Creating communication thread…
    2018-01-03 21:21:41: Creating communication done…
    2018-01-03 21:21:41: Initialize communication thread.
    2018-01-03 21:21:41: Communication thread test start – #1
    2018-01-03 21:21:42: VRPath reg output:

    2018-01-03 21:21:42: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:21:42: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:21:46: Communication thread test end – #1
    2018-01-03 21:21:46: Communication thread test start – #2
    2018-01-03 21:21:47: Start/Stop sequence starting.
    2018-01-03 21:21:47: Kinect 360 Runtime detected: True
    2018-01-03 21:21:47: Kinect One Runtime detected: False
    2018-01-03 21:21:47: Kinect 360 – Starting connection.
    2018-01-03 21:21:47: Kinect 360 – found!.
    2018-01-03 21:21:48: Kinect 360 – connected.
    2018-01-03 21:21:49: Creating processing thread… start.
    2018-01-03 21:21:49: Creating processing thread… done.
    2018-01-03 21:21:49: Initialize processing thread.
    2018-01-03 21:21:49: Sending communication to start driver – start.
    2018-01-03 21:21:49: Sending communication to start driver – complete.
    2018-01-03 21:21:49: Start/Stop sequence done.
    2018-01-03 21:21:49: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:21:49: Enumeration of devices starting… with 0
    2018-01-03 21:21:50: PS Move Service not required… skipping.
    2018-01-03 21:21:50: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:21:50: Daydream enumeration complete with 0 devices.
    2018-01-03 21:21:50: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:21:50: GearVR enumeration complete with 0 devices.
    2018-01-03 21:21:50: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:21:50: Starting devices…
    2018-01-03 21:21:50: Starting devices complete
    2018-01-03 21:21:50: Tracker update test start – #1
    2018-01-03 21:21:50: Tracker update test end – #1
    2018-01-03 21:21:50: Tracker update test start – #2
    2018-01-03 21:21:50: Tracker update test end – #2
    2018-01-03 21:21:50: Tracker update test start – #3
    2018-01-03 21:21:50: Tracker update test end – #3
    2018-01-03 21:21:50: Tracker update test start – #4
    2018-01-03 21:21:50: Tracker update test end – #4
    2018-01-03 21:21:50: Tracker update test start – #5
    2018-01-03 21:21:50: Tracker update test end – #5
    2018-01-03 21:21:51: Communication thread test end – #2
    2018-01-03 21:21:51: Communication thread test start – #3
    2018-01-03 21:21:56: Communication thread test end – #3
    2018-01-03 21:21:56: Communication thread test start – #4
    2018-01-03 21:22:02: Communication thread test end – #4
    2018-01-03 21:22:02: Communication thread test start – #5
    2018-01-03 21:22:07: Communication thread test end – #5
    2018-01-03 21:23:33: Start/Stop sequence starting.
    2018-01-03 21:23:33: Start/Stop sequence done.
    2018-01-03 21:23:34: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:23:39: End processing thread.
    2018-01-03 21:23:39: Shutdown of driver4vr application has been completed.
    2018-01-03 21:23:48: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:23:50: Creating communication thread…
    2018-01-03 21:23:50: Creating communication done…
    2018-01-03 21:23:50: Initialize communication thread.
    2018-01-03 21:23:50: Communication thread test start – #1
    2018-01-03 21:23:51: VRPath reg output:

    2018-01-03 21:23:51: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:23:51: Start/Stop sequence starting.
    2018-01-03 21:23:51: Sending communication to start driver – start.
    2018-01-03 21:23:51: Sending communication to start driver – complete.
    2018-01-03 21:23:51: Start/Stop sequence done.
    2018-01-03 21:23:51: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:23:51: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:23:51: Enumeration of devices starting… with 0
    2018-01-03 21:23:51: PS Move Service not required… skipping.
    2018-01-03 21:23:51: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:23:51: Daydream enumeration complete with 0 devices.
    2018-01-03 21:23:51: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:23:51: GearVR enumeration complete with 0 devices.
    2018-01-03 21:23:51: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:23:51: Starting devices…
    2018-01-03 21:23:51: Starting devices complete
    2018-01-03 21:23:55: Communication thread test end – #1
    2018-01-03 21:23:55: Communication thread test start – #2
    2018-01-03 21:24:00: Start/Stop sequence starting.
    2018-01-03 21:24:00: Start/Stop sequence done.
    2018-01-03 21:24:00: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:24:00: Communication thread test end – #2
    2018-01-03 21:24:00: Communication thread test start – #3
    2018-01-03 21:24:05: Communication thread test end – #3
    2018-01-03 21:24:05: Communication thread test start – #4
    2018-01-03 21:24:06: Shutdown of driver4vr application has been completed.
    2018-01-03 21:24:20: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:24:21: Creating communication thread…
    2018-01-03 21:24:21: Creating communication done…
    2018-01-03 21:24:21: Initialize communication thread.
    2018-01-03 21:24:21: Communication thread test start – #1
    2018-01-03 21:24:22: VRPath reg output:

    2018-01-03 21:24:22: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:24:22: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:24:27: Communication thread test end – #1
    2018-01-03 21:24:27: Communication thread test start – #2
    2018-01-03 21:24:32: Communication thread test end – #2
    2018-01-03 21:24:32: Communication thread test start – #3
    2018-01-03 21:24:32: Start/Stop sequence starting.
    2018-01-03 21:24:32: Kinect 360 Runtime detected: True
    2018-01-03 21:24:32: Kinect One Runtime detected: False
    2018-01-03 21:24:32: Kinect 360 – Starting connection.
    2018-01-03 21:24:32: Kinect 360 – found!.
    2018-01-03 21:24:33: Kinect 360 – connected.
    2018-01-03 21:24:33: Creating processing thread… start.
    2018-01-03 21:24:33: Creating processing thread… done.
    2018-01-03 21:24:33: Initialize processing thread.
    2018-01-03 21:24:33: Sending communication to start driver – start.
    2018-01-03 21:24:33: Sending communication to start driver – complete.
    2018-01-03 21:24:33: Start/Stop sequence done.
    2018-01-03 21:24:33: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:24:33: Enumeration of devices starting… with 0
    2018-01-03 21:24:33: PS Move Service not required… skipping.
    2018-01-03 21:24:33: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:24:33: Daydream enumeration complete with 0 devices.
    2018-01-03 21:24:33: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:24:33: Tracker update test start – #1
    2018-01-03 21:24:33: GearVR enumeration complete with 0 devices.
    2018-01-03 21:24:33: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:24:33: Starting devices…
    2018-01-03 21:24:33: Starting devices complete
    2018-01-03 21:24:33: Tracker update test end – #1
    2018-01-03 21:24:33: Tracker update test start – #2
    2018-01-03 21:24:33: Tracker update test end – #2
    2018-01-03 21:24:33: Tracker update test start – #3
    2018-01-03 21:24:33: Tracker update test end – #3
    2018-01-03 21:24:33: Tracker update test start – #4
    2018-01-03 21:24:33: Tracker update test end – #4
    2018-01-03 21:24:33: Tracker update test start – #5
    2018-01-03 21:24:33: Tracker update test end – #5
    2018-01-03 21:24:37: Communication thread test end – #3
    2018-01-03 21:24:37: Communication thread test start – #4
    2018-01-03 21:24:42: Communication thread test end – #4
    2018-01-03 21:24:42: Communication thread test start – #5
    2018-01-03 21:24:47: Communication thread test end – #5
    2018-01-03 21:28:14: Start/Stop sequence starting.
    2018-01-03 21:28:14: Start/Stop sequence done.
    2018-01-03 21:28:14: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:28:20: Start/Stop sequence starting.
    2018-01-03 21:28:20: Sending communication to start driver – start.
    2018-01-03 21:28:20: Sending communication to start driver – complete.
    2018-01-03 21:28:20: Start/Stop sequence done.
    2018-01-03 21:28:20: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:28:20: Enumeration of devices starting… with 0
    2018-01-03 21:28:20: PS Move Service not required… skipping.
    2018-01-03 21:28:20: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:28:20: Daydream enumeration complete with 0 devices.
    2018-01-03 21:28:20: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:28:21: GearVR enumeration complete with 0 devices.
    2018-01-03 21:28:21: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:28:21: Starting devices…
    2018-01-03 21:28:21: Starting devices complete
    2018-01-03 21:28:59: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:29:01: Creating communication thread…
    2018-01-03 21:29:01: Creating communication done…
    2018-01-03 21:29:01: Initialize communication thread.
    2018-01-03 21:29:01: Communication thread test start – #1
    2018-01-03 21:29:01: VRPath reg output:

    2018-01-03 21:29:01: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:29:01: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:29:04: Communication thread test end – #1
    2018-01-03 21:29:04: Communication thread test start – #2
    2018-01-03 21:29:09: Communication thread test end – #2
    2018-01-03 21:29:09: Communication thread test start – #3
    2018-01-03 21:29:14: Communication thread test end – #3
    2018-01-03 21:29:14: Communication thread test start – #4
    2018-01-03 21:29:16: Start/Stop sequence starting.
    2018-01-03 21:29:16: Kinect 360 Runtime detected: True
    2018-01-03 21:29:16: Kinect One Runtime detected: False
    2018-01-03 21:29:16: Kinect 360 – Starting connection.
    2018-01-03 21:29:16: Kinect 360 – found!.
    2018-01-03 21:29:16: Kinect 360 – connected.
    2018-01-03 21:29:16: Creating processing thread… start.
    2018-01-03 21:29:16: Creating processing thread… done.
    2018-01-03 21:29:16: Initialize processing thread.
    2018-01-03 21:29:16: Initialize processing thread.
    2018-01-03 21:29:16: Sending communication to start driver – start.
    2018-01-03 21:29:16: Sending communication to start driver – complete.
    2018-01-03 21:29:16: Start/Stop sequence done.
    2018-01-03 21:29:16: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:29:16: Enumeration of devices starting… with 0
    2018-01-03 21:29:16: PS Move Service not required… skipping.
    2018-01-03 21:29:16: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:29:17: Tracker update test start – #1
    2018-01-03 21:29:17: Daydream enumeration complete with 0 devices.
    2018-01-03 21:29:17: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:29:17: Tracker update test end – #1
    2018-01-03 21:29:17: Tracker update test start – #2
    2018-01-03 21:29:17: Tracker update test end – #2
    2018-01-03 21:29:17: GearVR enumeration complete with 0 devices.
    2018-01-03 21:29:17: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:29:17: Starting devices…
    2018-01-03 21:29:17: Starting devices complete
    2018-01-03 21:29:17: Tracker update test start – #3
    2018-01-03 21:29:17: Tracker update test end – #3
    2018-01-03 21:29:17: Tracker update test start – #4
    2018-01-03 21:29:17: Tracker update test end – #4
    2018-01-03 21:29:17: Tracker update test start – #5
    2018-01-03 21:29:17: Tracker update test end – #5
    2018-01-03 21:29:19: Communication thread test end – #4
    2018-01-03 21:29:19: Communication thread test start – #5
    2018-01-03 21:29:24: Communication thread test end – #5
    2018-01-03 21:30:07: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:30:09: Creating communication thread…
    2018-01-03 21:30:09: Creating communication done…
    2018-01-03 21:30:09: Initialize communication thread.
    2018-01-03 21:30:09: Communication thread test start – #1
    2018-01-03 21:30:09: VRPath reg output:

    2018-01-03 21:30:09: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:30:09: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:30:12: Communication thread test end – #1
    2018-01-03 21:30:12: Communication thread test start – #2
    2018-01-03 21:30:17: Communication thread test end – #2
    2018-01-03 21:30:17: Communication thread test start – #3
    2018-01-03 21:30:18: Start/Stop sequence starting.
    2018-01-03 21:30:18: Kinect 360 Runtime detected: True
    2018-01-03 21:30:18: Kinect One Runtime detected: False
    2018-01-03 21:30:18: Kinect 360 – Starting connection.
    2018-01-03 21:30:18: Kinect 360 – found!.
    2018-01-03 21:30:19: Kinect 360 – connected.
    2018-01-03 21:30:19: Creating processing thread… start.
    2018-01-03 21:30:19: Creating processing thread… done.
    2018-01-03 21:30:19: Initialize processing thread.
    2018-01-03 21:30:19: Sending communication to start driver – start.
    2018-01-03 21:30:19: Sending communication to start driver – complete.
    2018-01-03 21:30:19: Start/Stop sequence done.
    2018-01-03 21:30:19: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:30:19: Enumeration of devices starting… with 0
    2018-01-03 21:30:19: PS Move Service not required… skipping.
    2018-01-03 21:30:19: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:30:19: Tracker update test start – #1
    2018-01-03 21:30:19: Daydream enumeration complete with 0 devices.
    2018-01-03 21:30:19: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:30:19: Tracker update test end – #1
    2018-01-03 21:30:19: Tracker update test start – #2
    2018-01-03 21:30:19: Tracker update test end – #2
    2018-01-03 21:30:19: GearVR enumeration complete with 0 devices.
    2018-01-03 21:30:19: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:30:19: Starting devices…
    2018-01-03 21:30:19: Starting devices complete
    2018-01-03 21:30:19: Tracker update test start – #3
    2018-01-03 21:30:19: Tracker update test end – #3
    2018-01-03 21:30:19: Tracker update test start – #4
    2018-01-03 21:30:19: Tracker update test end – #4
    2018-01-03 21:30:19: Tracker update test start – #5
    2018-01-03 21:30:19: Tracker update test end – #5
    2018-01-03 21:30:22: Communication thread test end – #3
    2018-01-03 21:30:22: Communication thread test start – #4
    2018-01-03 21:30:27: Communication thread test end – #4
    2018-01-03 21:30:27: Communication thread test start – #5
    2018-01-03 21:30:31: Start/Stop sequence starting.
    2018-01-03 21:30:31: Start/Stop sequence done.
    2018-01-03 21:30:31: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:30:32: Communication thread test end – #5
    2018-01-03 21:30:43: Shutdown of driver4vr application has been completed.

    2018-01-03 21:31:00: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:31:02: Creating communication thread…
    2018-01-03 21:31:02: Creating communication done…
    2018-01-03 21:31:02: Initialize communication thread.
    2018-01-03 21:31:02: Communication thread test start – #1
    2018-01-03 21:31:02: VRPath reg output:

    2018-01-03 21:31:02: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:31:02: Start/Stop sequence starting.
    2018-01-03 21:31:02: Sending communication to start driver – start.
    2018-01-03 21:31:02: Sending communication to start driver – complete.
    2018-01-03 21:31:02: Start/Stop sequence done.
    2018-01-03 21:31:02: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:31:03: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:31:03: Enumeration of devices starting… with 0
    2018-01-03 21:31:03: PS Move Service not required… skipping.
    2018-01-03 21:31:03: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:31:03: Daydream enumeration complete with 0 devices.
    2018-01-03 21:31:03: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:31:03: GearVR enumeration complete with 0 devices.
    2018-01-03 21:31:03: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:31:03: Starting devices…
    2018-01-03 21:31:03: Starting devices complete
    2018-01-03 21:31:05: Communication thread test end – #1
    2018-01-03 21:31:05: Communication thread test start – #2
    2018-01-03 21:31:10: Communication thread test end – #2
    2018-01-03 21:31:10: Communication thread test start – #3
    2018-01-03 21:31:11: Start/Stop sequence starting.
    2018-01-03 21:31:11: Start/Stop sequence done.
    2018-01-03 21:31:12: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:31:15: Communication thread test end – #3
    2018-01-03 21:31:15: Communication thread test start – #4
    2018-01-03 21:31:17: Shutdown of driver4vr application has been completed.
    2018-01-03 21:31:30: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:31:32: Creating communication thread…
    2018-01-03 21:31:32: Creating communication done…
    2018-01-03 21:31:32: Initialize communication thread.
    2018-01-03 21:31:32: Communication thread test start – #1
    2018-01-03 21:31:32: VRPath reg output:

    2018-01-03 21:31:32: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:31:32: Start/Stop sequence starting.
    2018-01-03 21:31:32: Kinect 360 Runtime detected: True
    2018-01-03 21:31:32: Kinect One Runtime detected: False
    2018-01-03 21:31:32: Kinect 360 – Starting connection.
    2018-01-03 21:31:32: Kinect 360 – found!.
    2018-01-03 21:31:33: Kinect 360 – connected.
    2018-01-03 21:31:33: Creating processing thread… start.
    2018-01-03 21:31:33: Creating processing thread… done.
    2018-01-03 21:31:33: Initialize processing thread.
    2018-01-03 21:31:33: Initialize processing thread.
    2018-01-03 21:31:33: Sending communication to start driver – start.
    2018-01-03 21:31:33: Sending communication to start driver – complete.
    2018-01-03 21:31:33: Start/Stop sequence done.
    2018-01-03 21:31:33: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:31:33: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:31:33: Enumeration of devices starting… with 0
    2018-01-03 21:31:33: PS Move Service not required… skipping.
    2018-01-03 21:31:33: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:31:33: Daydream enumeration complete with 0 devices.
    2018-01-03 21:31:33: Tracker update test start – #1
    2018-01-03 21:31:33: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:31:33: Tracker update test end – #1
    2018-01-03 21:31:33: Tracker update test start – #2
    2018-01-03 21:31:33: Tracker update test end – #2
    2018-01-03 21:31:33: GearVR enumeration complete with 0 devices.
    2018-01-03 21:31:33: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:31:33: Starting devices…
    2018-01-03 21:31:33: Starting devices complete
    2018-01-03 21:31:33: Tracker update test start – #3
    2018-01-03 21:31:33: Tracker update test end – #3
    2018-01-03 21:31:33: Tracker update test start – #4
    2018-01-03 21:31:33: Tracker update test end – #4
    2018-01-03 21:31:33: Tracker update test start – #5
    2018-01-03 21:31:33: Tracker update test end – #5
    2018-01-03 21:31:35: Communication thread test end – #1
    2018-01-03 21:31:35: Communication thread test start – #2
    2018-01-03 21:31:40: Communication thread test end – #2
    2018-01-03 21:31:40: Communication thread test start – #3
    2018-01-03 21:31:45: Communication thread test end – #3
    2018-01-03 21:31:45: Communication thread test start – #4
    2018-01-03 21:31:50: Communication thread test end – #4
    2018-01-03 21:31:50: Communication thread test start – #5
    2018-01-03 21:31:55: Communication thread test end – #5
    2018-01-03 21:34:19: Start/Stop sequence starting.
    2018-01-03 21:34:19: Start/Stop sequence done.
    2018-01-03 21:34:19: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:34:22: Shutdown of driver4vr application has been completed.
    2018-01-03 21:34:24: Initializing driver4vr application ver: 3.1.0.0
    2018-01-03 21:34:26: Creating communication thread…
    2018-01-03 21:34:26: Creating communication done…
    2018-01-03 21:34:26: Initialize communication thread.
    2018-01-03 21:34:26: Communication thread test start – #1
    2018-01-03 21:34:26: VRPath reg output:

    2018-01-03 21:34:26: Runtime path = D:\Program Files (x86)\Steam\steamapps\common\SteamVR\
    Config path = D:\Program Files (x86)\Steam\config
    Log path = D:\Program Files (x86)\Steam\logs
    External Drivers:
    d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
    D:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr

    2018-01-03 21:34:26: Start/Stop sequence starting.
    2018-01-03 21:34:26: Kinect 360 Runtime detected: True
    2018-01-03 21:34:26: Kinect One Runtime detected: False
    2018-01-03 21:34:26: Kinect 360 – Starting connection.
    2018-01-03 21:34:26: Kinect 360 – found!.
    2018-01-03 21:34:27: Kinect 360 – connected.
    2018-01-03 21:34:27: Creating processing thread… start.
    2018-01-03 21:34:27: Creating processing thread… done.
    2018-01-03 21:34:27: Initialize processing thread.
    2018-01-03 21:34:27: Sending communication to start driver – start.
    2018-01-03 21:34:27: Sending communication to start driver – complete.
    2018-01-03 21:34:27: Start/Stop sequence done.
    2018-01-03 21:34:27: Connection status chanced to: Driver4VR detected and not running… press ‘Start Driver4VR’ ->
    2018-01-03 21:34:27: Connection status chanced to: Driver4VR detected and running!
    2018-01-03 21:34:27: Enumeration of devices starting… with 0
    2018-01-03 21:34:27: PS Move Service not required… skipping.
    2018-01-03 21:34:27: Daydream enumeration beging with already 0 devices.
    2018-01-03 21:34:27: Daydream enumeration complete with 0 devices.
    2018-01-03 21:34:27: GearVR enumeration beging with already 0 devices.
    2018-01-03 21:34:27: Tracker update test start – #1
    2018-01-03 21:34:27: GearVR enumeration complete with 0 devices.
    2018-01-03 21:34:27: Enumeration of devices starting completed with 0 total.
    2018-01-03 21:34:27: Starting devices…
    2018-01-03 21:34:27: Starting devices complete
    2018-01-03 21:34:27: Tracker update test end – #1
    2018-01-03 21:34:27: Tracker update test start – #2
    2018-01-03 21:34:27: Tracker update test end – #2
    2018-01-03 21:34:27: Tracker update test start – #3
    2018-01-03 21:34:27: Tracker update test end – #3
    2018-01-03 21:34:27: Tracker update test start – #4
    2018-01-03 21:34:27: Tracker update test end – #4
    2018-01-03 21:34:27: Tracker update test start – #5
    2018-01-03 21:34:27: Tracker update test end – #5
    2018-01-03 21:34:30: Communication thread test end – #1
    2018-01-03 21:34:30: Communication thread test start – #2
    2018-01-03 21:34:35: Communication thread test end – #2
    2018-01-03 21:34:35: Communication thread test start – #3
    2018-01-03 21:34:40: Communication thread test end – #3
    2018-01-03 21:34:40: Communication thread test start – #4
    2018-01-03 21:34:45: Communication thread test end – #4
    2018-01-03 21:34:45: Communication thread test start – #5
    2018-01-03 21:34:50: Communication thread test end – #5
    2018-01-03 21:36:22: End processing thread.
    2018-01-03 21:36:22: Shutdown of driver4vr application has been completed.

    • This topic was modified 6 years, 2 months ago by eloderungeloderung.
    #1855
    eloderungeloderung
    Participant

    Here are the three logs requested on the sticky post.

    #1863
    Bla BlablaGreg Driver
    Keymaster

    hi. sorry but due to bug in wordpress you cannot upload attachments. i will schedule upgrade but in meanwhile can you send me them to email driver4vr at gmail dot com.

    i cannot see any error in log that you displayed on topic unfortunately.
    my question is if you followed my video tutorial. in your case did you see trackers at the end in steam room and do you see calibration error as low?

    Greg

    #1903
    eloderungeloderung
    Participant

    Hi Greg, thanks for the assistance.

    I did follow that tutorial from start to finish several times. The three Vive trackers have only appeared once after calibration’s completion; typically I do not see the three trackers during or after calibration.

    I sent over the requested files as well as two screenshots (post calibration of steam VR status overlay, and of the final calibration screen). I also took a video of two calibration attempts and some settings screens in Steam VR and on your program ( https://www.youtube.com/watch?v=UU0lSILQQ3U&feature=youtu.be ), however, I didn’t set up the recording view properly so it was zoomed in at the top left of my screen. I can re-do that video sometime if needed.

    Let me know if you need anything else!

    #1904
    Bla BlablaGreg Driver
    Keymaster

    Hi,
    https://youtu.be/UU0lSILQQ3U?t=4m11s

    I cannot see calibration error. Can you tell what it is at the end ?

    EDIT: ok. i found your email 🙂 let me check.

    • This reply was modified 6 years, 2 months ago by Bla BlablaGreg Driver.
    #1906
    Bla BlablaGreg Driver
    Keymaster

    ok. so one thing we can fix is to remove extra reference to library.

    can you go to steamvr folder – usually
    C:\Program Files (x86)\Steam\steamapps\common\SteamVR\bin\win64

    and type:

    vrpathreg removedriver “d:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr”

    and then try again

    #1985
    eloderungeloderung
    Participant

    Hey Greg,

    After doing that step and re-calibrating, everything ran flawlessly. However, the issue appears to come back every time Steam VR is closed and re-opened without running through that troubleshooting step another time. I’m sending new logs over to you via email.

    In addition, after using the driver in VRChat for several minutes, the trackers all disappeared and stopping/restarting the driver service did not work until re-doing the troubleshooting step and closing steam VR.

    • This reply was modified 6 years, 2 months ago by eloderungeloderung.
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.