Version 3.2 – PSMove button dont work

Homepage Forums Positional tracking – head and head trackers Version 3 Beta testing Version 3.2 – PSMove button dont work

Tagged: ,

Viewing 30 posts - 1 through 30 (of 30 total)
  • Author
    Posts
  • #2058
    Pruld
    Participant

    (sry for potato english)
    The psmove controller work fine, position and rotation!
    But the button dont work!

    Im using lightball set for Head and Hands

    #2059
    Greg Driver
    Keymaster

    you might still have ps move bridge installed?
    it happened to few people and this was the case.

    #2060
    Pruld
    Participant

    I have only installed PSMoveservice and PSMoveconfigtools

    When i use the PSMoveconfigtools and check for the button press, they work!
    They only not work inside the VRsystem

    • This reply was modified 2 years, 8 months ago by Pruld.
    #2075
    Pruld
    Participant

    How can i uinstall that?

    #2076
    Pruld
    Participant

    I tryed everything, even install the Driver4VR version 3.1
    Notthing works!

    And i dont have the PSMove bridge that you metioned before…
    What should i do!?

    #2077
    Pruld
    Participant

    Now…
    I tryed to install the PSMove bridge, and when i start SteamVr a big screen shows up showing the “green plane”, the one you are when you’re in VR and not playing

    Now notthing works, even reinstalling SteamVR dont fix up…
    What can i do now?

    #2078
    Pruld
    Participant

    Ok im back to the previous stats…
    So, the Vr works, che roation and position of controllers works but the buttons dont…

    Now im not touching anithing…
    Just…hope…in something

    #2084
    Jna
    Participant

    Hey PruId,

    I had this issue before, the solution was to uninstall Driver4VR, STEAMVR also delete the Driver4VR section in the ‘steamvr.vrsettings’. Install them again and it should work fine.

    Please note that you only need the ps move service so uninstall the ps move bridge service.

    #2086
    Pruld
    Participant

    Thank you very much Jna for trying to help me…
    But no…

    I have already tried that way, unistalled SteamVR and Driver4VR, removed the “steamvrsettings” from the config and installed and removed the bridge
    My sistem is actualy “vanilla” now, and it dont work

    When i use the PSMove controller in other sistem (like che PSMoveConfigTool) the button works fine, when i enter the VR…not.
    The rotation and position of the controller works good, buttons not…

    i cant really understand what is going on…

    #2088
    UselessMouth
    Participant

    I am having exactly the same problem as Pruld: everything works fine except in-game PS Move buttons.
    Also, if I will try to hook up my Joy-Cons and assign buttons to Leap Motion, nothing will happen and buttons will not work in the game.

    #2091
    Pruld
    Participant

    Jna – could you send me your steamvrsettings?
    just to see what’s different by mine from yours

    UselessMouth – if you find a way to fix this, please, share with me!!

    #2093
    Greg Driver
    Keymaster

    hi.
    can you upload logs ? change extension to txt.
    greg

    #2094
    Pruld
    Participant

    Here, i have installed Driver4VR 3.1.0 version to make a test…
    It is not working

    Attachments:
    You must be logged in to view attached files.
    #2097
    UselessMouth
    Participant

    @Pruld, if I’ll fix it – will do!


    @Greg
    , Hi!
    I’ve got Windows 10, non-english, DVR and Game Mode disabled.
    I use TrinusPSVR and I only installed PSMoveService, not bridge.
    Driver4VR is 3.2.0, using with Kinect One.
    SteamVR is current, not Beta.

    I’ve tried previous versions of Driver4VR – PSMove buttons didn’t work anyway.
    Adding PSMove button prompts to steamvr.vrsettings didn’t help.
    Tried SteamVR Beta, didn’t help.

    Attachments:
    You must be logged in to view attached files.
    #2102
    Jna
    Participant

    Hey,

    Try also to delete the C:\Program Files (x86)\Steam\steamapps\common\steamvr folder before installing steamvr again also make sure to run the ‘SteamVR_UninstallDriverWin64.bat’ of the steamvr bridge service.

    I’m uploading my ‘steamvr.vrsettings’ file

    Attachments:
    You must be logged in to view attached files.
    #2132
    bad.boo
    Participant

    Hey Jna,
    If I use your steamvr.settings.txt, do I need to change anything in that file? Or the way you have it works fine?

    I am in this situation as well.

    I think because I was using the daley tech tutorials to use the psmove service with the ps eyes, it may be messing up everything.

    Your steamvr.settings.txt looks way different than mine though.

    I will try it and come back to see how it goes.

    #2141
    renetty
    Participant

    I am having this issue too. I have tried reinstalling Steam VR and Driver4VR as mentioned above. I only have the psmoveservice and not the psmovebridge. I have am using the Kinect 360 (skeleton head tracking, light ball controller tracking), PS move controllers are paired and calibrated. Color tracking works. Rotation and movement of controllers works in Steam VR Home, but no other button mappings.

    Any advice would be helpful.

    • This reply was modified 2 years, 8 months ago by renetty.
    Attachments:
    You must be logged in to view attached files.
    #2144
    bad.boo
    Participant

    Yep, my steamvr buttons dont work either.

    #2150
    Pruld
    Participant

    We should sacrifice one of us to the VRGOD so maybe we can have the PSMove buttons back!

    #2156
    wrmuux
    Participant

    After 2 days of reinstalling and trying i managed to get everything working (lately i just got the problem that my steamvr showed me four controllers because of psmovesteamvrbridge, which is now deinstalled). Just these buttons won’t work :/

    #2166
    UselessMouth
    Participant

    Maybe this button problem have something to do with this new SteamVR update?
    Here’s the news.

    I know, it’s only in beta, but who knows.

    #2171
    wrmuux
    Participant

    Maybe :/ hopefully its getting fixxed or Greg finds a workaround, i just managed to get everything working and now this button problem… sad af.

    #2174
    Pruld
    Participant

    Open your Steam Library
    Go to StreamVR
    Right click on SteamVR and select “propiety”
    Go to BETA
    Select “openvr-imputemulator-temporary(etc…)”
    Install the beta and try your VR system

    This worked for me!

    #2183
    Greg Driver
    Keymaster

    Hi,
    Sorry to hear you have so many problems.
    I am working now to upgrade to version 12 of OpenVR that is a bit different.
    Until that happens you should go to openvr-imputemulator-temporary beta of SteamVR as @Pruld says.
    My plan is to first upgrade to v12 and then I will add more logs to determine potential problems.

    When you had before installed PSMoveServiceSteamVRBridge then the driver get’s installed into SteamVR folder. When you uninstall but not delete SteamVR folder it might happen that this driver will remain as it was not part of the original installation… Therefore you should remove SteamVR folder manually.

    Before such issue only happened when you had bridge installed and removing it was effectively addressing problem.

    In in 2-3 days I will release version using new API with additional logs and we will finally sort this out!

    Greg

    Greg

    #2209
    wrmuux
    Participant

    Oh you mean the Steam VR Beta i thought u mean the matzman666/OpenVR-InputEmulator fro m Github, i’ll try it out now and say if it helped.

    Btw ty for the help @Pruld and of cause @Greg and i hope you’ll find an easy fix with the v12.

    #2210
    wrmuux
    Participant

    Ok i just downloaded the SteamVR openvr-inputemulator-temporary and everything works, ty @pruld, now i just have to get the riftcat beta working 😀

    #2213
    bad.boo
    Participant

    thanks for looking into this Greg, sorry if we end up being annoying sometimes lol
    I will do as advised.
    looking forward for your new release.
    cheers

    #2294
    Greg Driver
    Keymaster

    hi.
    this is a version that will work on main/non-beta or input-emulator branch.
    i tested this version today in depth and it works well for me.
    now we will not have PseudoVive as I could not make it to work but rather emulate left and right touch controller but they don’t work 100% yet.
    for vive emulation i tested today few games with either ps move or leap+gampad and all seems work fine.
    tomorrow i will do more testing. if anyone interested to try installer is here. remember to return to main branch of steamvr.
    it should also not treat body trackers as input 🙂
    https://drive.google.com/file/d/1VHyzUv76L1-w5MhDYHY1-m4nq_ZlbRZQ/view?usp=sharing

    greg

    #5582
    Adrian Wronka
    Participant

    Hi Greg Could you re-issue the file. Because Google claims it has been removed.
    I also have a problem with the PSmove buttons not working.

    Greetings

    #5583
    Greg Driver
    Keymaster

    the changes are incorporated into main version already.
    why would you like this one?

Viewing 30 posts - 1 through 30 (of 30 total)
  • You must be logged in to reply to this topic.