Homepage › Forums › Body tracking › Using Vive Pro, trackers v2.0 and Kinect v.2 together

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2018-10-04 at 13:05 #5478
    Radoslav RadivojevicRadoslav Radivojevic
    Participant

    https://www.tomshardware.co.uk/driver4vr-kinect-full-body-vr-tracking,news-56760.html
    This page mentioned that it cannot be use. Only Oculus Rift is supported. Is that still true and what can be done about it? Any tutorials about how to use it and any example project that show how to do full body tracking in Unity 2018

    2018-10-05 at 09:06 #5492
    Bla BlablaGreg Driver
    Keymaster

    this only means that kinect v2 will not work well with htc vive. they use same ir range and will break tracking. however I tried one setup and I was under impression that it works. will make video about thils.

    until week ago I would normally say that I have no clue about unity but I have now. will make simple tutorial how I use unity to get body trackers.

    2018-10-05 at 09:06 #5493
    Bla BlablaGreg Driver
    Keymaster

    so you better subscribe to youtube channel 🙂

    2018-10-05 at 20:49 #5508
    Radoslav RadivojevicRadoslav Radivojevic
    Participant

    Excellent Greg. You are a great supporter of your product. Please continue to do so. I hope you are young enough to support it for another 30 years 🙂
    In you future video you mentioned above: “simple tutorial how I use unity to get body trackers”, can you explain the coding logic/background for other do read, understand and extend the code to fit their need, and also mention what to do when you have some new tracker which uses BT LE, WiFi or other communication channel.

    I am a c# developer and I wanted to know how to add trackers 6DoF or 9DoF like MetaMotionR as I mentioned in:

    Using MetaMotionR trackers by Mbientlab together with Vive Pro and trackers v2.0

    I also purchased
    https://www.adafruit.com/product/2472
    (Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout – BNO055)
    along with https://www.adafruit.com/product/3010
    (Adafruit Feather M0 WiFi – ATSAMD21 + ATWINC1500) so very similar setup like MetaMotionR and I would like to use this Aruino Zero compatible board to see detected motion via WiFi to Unity. Any recommendation and reading on how to do that?

    Is it possible to transfer body movements over the internet so using stemvr and DrivereVR so a remote body tracker can control a person in VR game and a local player can control his avatar (third person). Is the first person avatar a third person as well
    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.