unwanted induced movement when in light bulb tracking

Homepage Forums How-to and troubleshooting unwanted induced movement when in light bulb tracking

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #4527
    lefunestelefuneste
    Participant

    I got working driver4VR and kinect360 in both skeleton and light bulb mode with the last 4.0 version,
    But the light bulb tracking is not usable. I had the bulb on the top of my head: when I look up/down the POV go up or down, and same effect when I look left or right, the POV shift to the left or to the right. I have the same effect in skeleton mode, but bearable because slighter.
    Is it possible to set an offset between the light bulb position and the POV/rotation center ?

    #4544
    Bla BlablaGreg Driver
    Keymaster

    hi.
    bulb should track where your headset is. so it should be on the top of headset.
    let me know if that works for you.
    Greg

    #4612
    lefunestelefuneste
    Participant

    Yes, it reduce greatly the unwanted move. But it is better for me to have the light bulb on top of my head, because the camera can track my head it even if I am checking my six in my virtual plane (that is looking behind).
    And I have some shivering when using the kinect…So finally PSMOVE is better for my config.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.