Leap Motion bluetooth controller orientation settings

Homepage Forums General Leap Motion bluetooth controller orientation settings

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #817
    JonnyJonny
    Participant

    I worked out a good setup for leap bluetooth controllers that gives something close to normal orientation. How well it works seems to depend a lot on the controller though. I tried vrcase with this and it seems good, but my other cheap vr controller loses tracking, and works fine on default settings. Default is reliable, but this is good for shooting games.

    The settings are 20, 0, -73.

    If anyone has any variations, please share.

    • This topic was modified 3 years, 1 month ago by JonnyJonny.
    #903
    Bla BlablaGreg Driver
    Keymaster

    hi.
    i added option to remove overlap what was requested few times. i appreciate if you don’t midn giving it a try. this is in controller settings next to leap on/off.

    https://drive.google.com/file/d/0B97CTM_n2lgMVUpvMlRIclBmYUU/view?usp=sharing

    #925
    JonnyJonny
    Participant

    Sure, I tried it and it seems to work great.

    0 makes the controllers too close with no overlap. 20 too far with too much overlap.
    I found 10-12 gives a nice compromise between the two. On Operation Warcade the bow seems to work better that way, but haven’t tested it on other games.

    Tested only with default orientation settings.

    #1014
    Bla BlablaGreg Driver
    Keymaster

    thanks for this tip.
    greg

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.