Homepage › Forums › How-to and troubleshooting › Kinect 360 setup issues

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017-09-26 at 09:13 #537
    AlopexAlopex
    Participant

    Hi Greg,

    I’ve followed the instructional video for setting up Driver4VR with Kinect 360, however The Kinect does not show up under the Driver4VR devices list.

    Body tracking from Kinect is on, and the Kinect tilt angle is adjustable from the settings, however the device does not show up on the list, and calibration isn’t possible (red view with no apparent tracking at all).

    Any thoughts or suggestions?

    Cheers

    2017-09-26 at 09:43 #538
    AlopexAlopex
    Participant

    Nevermind, after doing some testing I’m fairly certain that the problem is due to low-light in my study. Whoops!

    Still not quite sure why the device wasn’t showing up in the list for Driver4VR though.

    Thanks anyway, I’ll do some more testing here. 🙂

    • This reply was modified 6 years, 7 months ago by AlopexAlopex.
    • This reply was modified 6 years, 7 months ago by AlopexAlopex.
    2017-09-26 at 10:19 #541
    AlopexAlopex
    Participant

    Alright. Got it all working! Thread can be deleted. Sorry for the hassle.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.