2018-11-11 at 11:51 #5600
Hello after a lot of trys i have the psmove controller up and running in Driver4VR
I have assigned them and can see the rotation in Driver4vr preview.
But suddenly the D4 Symbol in Steam VR is not active also there are no controllers shown
Another question is what has to be started as admin and what not
because with the old versions i had to start psmove in admin mode …
Now i got lost2018-11-12 at 10:33 #5605Greg DriverKeymaster
can you check for info on main window that trial has expired?2018-11-12 at 11:13 #5606
THX for the fast answer Greg
i am on a business trip … will do the check thuesday when i am back home
Michael2018-11-25 at 14:23 #5628
as you mentioned :look for trail was nice but the account is ok
meanwhile i reinstalled my whole computer
i think for me your tutorials are for me as a noob not exactly at all
so i do not have any cameras shown in steamvr
today i paired controller yes and could see it in steam, but :
much too slow–>reactions mostly 3 secs after pressing
controller itself not shown in steam room
the laser… when it lits up comes from the ground
so for me there are too many questions open
my setup is
4 ps eye cams
shouldn´t i see
and 4 cameras
in Steam ?
also i have to start driver4vr in admin mode otherwise i am not able to fire up psmove service it just closed directly
i think that because many people do not have this i nearly to give up,
maybe i am just to old with 50+2018-11-25 at 16:38 #5629
After i found some likely posts here is my output
c:\Program Files (x86)\Steam\steamapps\common\SteamVR\bin\win64>vrpathreg
Runtime path = C:\Program Files (x86)\Steam\steamapps\common\SteamVR\
Config path = C:\Users\MCPXXL\AppData\Local\openvr
Log path = C:\Users\MCPXXL\AppData\Local\openvr
C:\Program Files (x86)\Steam\steamapps\common\SteamVR\drivers\psmove
C:\Program Files (x86)\Driver4VR\lib\drivers\driver4vr
c:\Program Files (x86)\Steam\steamapps\common\SteamVR\bin\win64>2018-11-26 at 06:23 #5632Greg DriverKeymaster
hi. so what is problem now? again don’t see d4 icon ?
if you use ps eyes then you are probably on SteamVR with inputemulator branch.
This is not supported right now. Can you try this older version instead?2018-11-26 at 07:10 #5635
i see D4 and two controllers
and yes choosed psmove as Handtrackers 🙁
but my question was that i could remind in the beginning of testing psmovesercie i had also 4 camera Symbols ?
i am going to buy a kinect 2 with adapter today but hope that i can use the psmove at last as handcontroller
- You must be logged in to reply to this topic.