Homepage › Forums › How-to and troubleshooting › Could not start Kinect

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017-12-24 at 02:26 #1605
    GentleFPSGentleFPS
    Participant

    I have everything installed, and even Skeleton Basics works, but when I press start on Driver4VR it says it could not start my kinect.

    Does anyone have any suggestions for things I can do to try to fix it?

    • This topic was modified 5 years, 9 months ago by GentleFPSGentleFPS.
    2017-12-24 at 22:34 #1611
    TheJaegerTheJaeger
    Participant

    It seems like your Kinect is competing with other devices on the USB bus. Just FYI, Kinects uses a lot of USB bandwidth, so switch to another unused USB root hub. You may need to purchase a PCI-E USB expansion if you don’t have enough root hubs.

    EDIT: Switch around USB ports until it works essentially. If your PC’s front panel (or laptop’s side panel) have a bunch of USB ports, connect there. Make sure there is nothing else connected to the remaining USB 2.0 ports.

    • This reply was modified 5 years, 9 months ago by TheJaegerTheJaeger.
    • This reply was modified 5 years, 9 months ago by TheJaegerTheJaeger. Reason: Grammar
    2017-12-25 at 09:21 #1616
    Bla BlablaGreg Driver
    Keymaster

    Hi,
    Can you plase send me driver4vr.log from program installation folder?

    There should be info about any failtures.
    Please rename file to txt if you have problem with attaching.

    Merr Xmas 😊
    Greg

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.