calibration problems with leap

Homepage Forums Body tracking calibration problems with leap

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #15292
    Daryl Stacksnowball
    Participant

    i am using the Kinect One and Ultraleap sensor with a Quest
    The Quest hand controllers are off(battery out)
    when i am trying to calibrate(2-step) i can’t put hands at my sides and look forward because the Leap loses tracking and the hands end up calibrating up in space
    So the Kinect knows where my hands are but this fact does not seem to be prioritised over Leap positioning, which in this case is undefined.
    is there a way to do this? i have spent over 100 hours trying to make it happen and i’ve
    run out of ideas.

    #15859
    t dizzlet dizzle
    Participant

    TLDR:Setup your kinect with your controllers, then quit and restart, THEN setup the leap. At that point, you do not need to calibrate again.

    I suggest you calibrate the kinect’s positioning first, then work on getting the leap. I see your issue, and the only thing I can gather, is I am not initially setting it all up with a leap motion. Likewise, if the auto calibrate does not work properly, choose th manual option, and align the camera and sensors yourself, so no need for “hands to the side”.

    #15862
    Bla BlablaGreg Driver
    Keymaster

    interesting case. why isn’t it enough to do it once?

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.